How To Flash:

1. Samsung Galaxy Note 5 SM-N920T RESET EFS Solution 100% Tested Without Credit 100% Working
2. J600G Binary U3 MDM Remove Solution 100% Tested Without Credit 100% Working
3. Sm J730F Fix (IMEI) Null U3 Solution EFS File 100% Tested Without Credit 100% Working
4. Samsung Galaxy J3 Luna Pro (S327VL) Tested Unlock File
5. Samsung J7 Sky Pro ( S727VL) U4 Unlock Tested File
6. Samsung Galaxy S7 Edge Convert To G965F/FD 8.0 100% Fixed File Free Download
7. Samsung Galaxy S7 EDGE (G935F) Binary U2 6.0.1 Downgrade Tested File Free Download
8. Samsung Galaxy A7 (A720F) (A720FD) Binary U5 v8.0 Reset FRP Without Flashing Tested 
9. Samsung Galaxy Note 4 SM N910C Binary U2 Frp Lock Remove 100% Tested File
10. SM-G8870 Factory (SW) Combination File For Drk And Frp 100% Tested Ok 

Samsung A8 ( A530F) Binary S3 v8.0

1. Samsung Galaxy Note 5 SM-N920T RESET EFS Solution 100% Tested Without Credit 100% Working
2. J600G Binary U3 MDM Remove Solution 100% Tested Without Credit 100% Working
3. Sm J730F Fix (IMEI) Null U3 Solution EFS File 100% Tested Without Credit 100% Working
4. Samsung Galaxy J3 Luna Pro (S327VL) Tested Unlock File
5. Samsung J7 Sky Pro ( S727VL) U4 Unlock Tested File
6. Samsung Galaxy S7 Edge Convert To G965F/FD 8.0 100% Fixed File Free Download
7. Samsung Galaxy S7 EDGE (G935F) Binary U2 6.0.1 Downgrade Tested File Free Download
8. Samsung Galaxy A7 (A720F) (A720FD) Binary U5 v8.0 Reset FRP Without Flashing Tested 
9. Samsung Galaxy Note 4 SM N910C Binary U2 Frp Lock Remove 100% Tested File
10. SM-G8870 Factory (SW) Combination File For Drk And Frp 100% Tested Ok 

How To Flash:

• 1:Download and install device driver software on your computer.
• 2:Download and extract the Stock ROM (Official/Original Firmware).
• 3:Download and extract Odin on you PC.
• 4:Boot your Samsung device into Download mode.
• Power off your device
• Press and hold Volume Down key, Home Key and Power Key
• When your device vibrates, release Power key while keep holding the Volume Down key and Home key
• Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
• 5:Connect your device to PC then Device is connected to Odin.
• 6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start"

1. Power off your device
2. Press and hold Volume Down key, Home Key and Power Key
3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". After adding the file, click "Start" to begin the flashing process.
6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
8. Flash succeeded
9. A To Z Flash File

Samsung J3 EMERGE (J327P) U2 Full Fixed ROM

1. Power off your device
2. Press and hold Volume Down key, Home Key and Power Key
3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". After adding the file, click "Start" to begin the flashing process.
6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
8. Flash succeeded
9. A To Z Flash File

1:Download and install device driver software on your computer.
2:Download and extract the Stock ROM (Official/Original Firmware).
3:Download and extract Odin on you PC.
4:Boot your Samsung device into Download mode.
Power off your device
Press and hold Volume Down key, Home Key and Power Key
When your device vibrates, release Power key while keep holding the Volume Down key and Home key
Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5:Connect your device to PC then Device is connected to Odin.
6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".

1. Power off your device
2. Press and hold Volume Down key, Home Key and Power Key
3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". After adding the file, click "Start" to begin the flashing process.
6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
8. Flash succeeded